Specifications
Sensitivity: 10mV / Pa ¯ 100mV @114dB SPL.
Impedance: 3K Ohm
Polar: Omni-directional.
Frequency Response: 20 ¯ 20KHz…
Standard Operating Voltage 1.5V
Power Consumption: 24uA typical
Output Self Noise Voltage: -100dBV maximum, A-Weighted
Max sound pressure for 1% total Harmonic Distortion is 125dB SPL, Max SPL is 130dB
Dynamic Range in the order of 93dB
Signal to noise ratio in access of  80dB
Sensitivity @ 1k Hz is 7.2mV
Operating Temperature: -17 to 63C
Humidity Coefficient of sensitivity: 0.06dB/% Relative Humidity, non-condensing.
Mechanical
MITS-1 8.5mm x 5.5mm depth
Wiring
3 wire version is standard
Wiring Specifications - PDF file (93k)
(Audio Ltd, Lectro TA5F, Micron 500/700, Sony WRT, Zaxcom 4 pin Lemo)

Animation